skatingforums.com  

Go Back   skatingforums.com > Figure Skating > On Ice - Skaters

Reply
 
Thread Tools Display Modes
  #1  
Old 03-31-2003, 04:34 PM
CanAmSk8ter CanAmSk8ter is offline
Registered User
 
Join Date: May 2002
Posts: 135
Anyone have the new Risport boots?

The Risport booth at Worlds had their current catalog and it looks like they've changed a lot. I guess I have three main questions:

1. Do they still make Super Diamante, which is what I have now, and if not, what is the closest thing to it that they are making?

2. Does anyone have the RF2 dance boots?

3. If yes, do you like them?

I'm ready for new boots; my Super Diamantes are about 18 months old and are getting to the point where to get decent support I have to tie them really tight, but then I can't bend my knees. I'm 5'1", 115 lbs, and working on my Silver and Pre-Gold dances- are the RF2D's going to be too heavy for me? They felt heavy when I held them, but I know that can be deceiving. I like the idea of a dance boot, but at the same time I've done great with my last two pairs of boots, both of which were Super Diamante, so I'm not sure whether it's worth trying something new.
Reply With Quote
  #2  
Old 03-31-2003, 05:47 PM
dalsvet dalsvet is offline
Registered User
 
Join Date: May 2002
Posts: 11
I have the new RF1 boots (desperately trying to break them in!), which are the equivalent of old Super Qasars. My old pair were Super Diamonts, which I believe are now RF2s. The RF1s feel lighter than the diamonts, but the ankle support is much stronger.
Reply With Quote
  #3  
Old 04-01-2003, 05:18 AM
Aussie Willy Aussie Willy is offline
Registered User
 
Join Date: May 2002
Posts: 0
I have RF2 - the super model (equilvalent of Super Diamont). They are actually higher around the ankles than the Super Diamont. I have never tied the top hooks so I can get knee bend. Also I have had problems with the instep - even after two years they still cause problems here - I have to take them off after about 10 minutes and put them on again and then they seem to be alright. I think this is a common complaint with the RF2s. I personally preferred the Super Diamonts - took a bit longer to break in but they were a lot more comfortable than my current pair. I am now putting sheep skin insoles in them in the hope that will make them more comfortable (will see how it goes tomorrow night at skating).

Do they make an RF2 dance boot?

Can I make a suggestion about boots for dance. WIFA (in Austria) specifically make a dance boot which has an elasticised back so you can get better toe point. Someone at my rink has them and they are really nice. They also have about six boot widths as opposed to four which Risport have. You might like to check them out.
__________________
Check out Cool Cat Skating Products - Australian Owned and Produced Skating Stuff.
www.geocities.com/aussiecoolcat/index
Reply With Quote
  #4  
Old 04-01-2003, 11:22 AM
CanAmSk8ter CanAmSk8ter is offline
Registered User
 
Join Date: May 2002
Posts: 135
Quote:
Originally posted by Aussie Willy
I have RF2 - the super model (equilvalent of Super Diamont). They are actually higher around the ankles than the Super Diamont. I have never tied the top hooks so I can get knee bend. Also I have had problems with the instep - even after two years they still cause problems here - I have to take them off after about 10 minutes and put them on again and then they seem to be alright.
I wonder if the higher ankles are why they started making a dance boot? It definitely sounds like the dance boot is something I should look into. From the catalog I saw, it sounds like the dance boot, RFD, as basically the same as the RF2 but with the lower back, and it only comes in beige. I've only ever had white skates, but I know my coach likes me to wear over-the-boot tights so my legs look a little longer, so he'll probably go for it. I'm only (barely) 5'1, so I need any length I can get, LOL!
Reply With Quote
  #5  
Old 04-02-2003, 12:34 AM
Aussie Willy Aussie Willy is offline
Registered User
 
Join Date: May 2002
Posts: 0
CanAmSk8ter - I think you might be right. Even though I do ice dancing I would say my boots are not suitable for dance because it is very difficult to get good leg extension. What is the link to the website so I can have a looksee?
__________________
Check out Cool Cat Skating Products - Australian Owned and Produced Skating Stuff.
www.geocities.com/aussiecoolcat/index
Reply With Quote
  #6  
Old 04-03-2003, 01:31 AM
TashaKat TashaKat is offline
Registered User
 
Join Date: May 2002
Posts: 0
I'm not going to comment on Risports because I don't like them but have used Wifa's which are pretty widely used in Dance. I had the Super Goldstar's which were great for dance and the Diamonds which wrecked my anklebone but weren't strong enough for Free! What you COULD do is get the 'normal' boots and get them cut down at the back. A lot of dancers do that to get the right amount of 'cutout' for themselves

If you want to spend a bit more Harlick do 'dance' options which look nice but I haven't tried them yet!

Good luck

L x
__________________
The best whisper is a click
Reply With Quote
  #7  
Old 04-03-2003, 05:44 AM
jenlyon60 jenlyon60 is offline
Registered User
 
Join Date: May 2002
Posts: 1,418
I've known a couple people who bought stock boots and took them to a shoe repair place and had the top 1/2" or more cut off the boots for dance.

I ordered my last 2 pairs of Klingbeils cut shorter about 1/2 to 3/4". Skipped the dance scallop, though...and haven't missed it yet.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:23 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Copyright © 2002 - 2005 skatingforums.com. All rights reserved.
Copyright © 2002 Graphics by Dustin. May not be used without permission.
Posts may not be reproduced without the first obtaining the written consent of the poster.