skatingforums.com  

Go Back   skatingforums.com > Figure Skating > On Ice - Skaters

Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2006, 08:36 PM
sue123 sue123 is offline
Registered User
 
Join Date: Nov 2004
Posts: 0
Finger blisters

Does anyone else get blisters when they lace up their skates? I don't know if it's my laces, or if the skin on my fingers is just thin, but it really hurts because it's right on the part where teh joint is, which makes bending my fingers painful. And taking a shower is not a pleasant experience because when it bursts, ouch. Is there anything I can do to avoid this? A different type of laces maybe? Honestly, I don't remember what type of laces I'm using, they came with my skates.
Reply With Quote
  #2  
Old 10-04-2006, 08:42 PM
Award Award is offline
Registered User
 
Join Date: Aug 2006
Posts: 305
Yep....I do. On my pinky finger. On the side of the last join closest to the tip of the pinky. The lace rubs. Not that nice at all, and sometimes the skin cracks there, obviously not a good thing. Because I isolate it to just that part there, I stick a band-aid around that joint. No more problems after that. Except the band-aid costs a little bit. But well worth it. Same idea applies to blisters from skates rubbing. Band-aids to put a shield between us and whatever is causing the damage. Using a lace tightener device so that we don't have to pull the laces as much helps a bit too.
Reply With Quote
  #3  
Old 10-04-2006, 08:44 PM
Debbie S Debbie S is offline
Registered User
 
Join Date: May 2002
Posts: 1,160
I'm willing to bet you have nylon laces. They are thinner than the cotton ones (or the cotton/nylon blend) and can definitely cause what you are describing. I had nylon laces on my previous skates, and the blended ones on my current skates, and I always put on my gloves when I lace up. I take the gloves off to tie the laces at the top and tuck the loose ends in, but that's it.

I wouldn't recommend changing the type of laces b/c whatever laces you have are geared to the size of the holes on your skates. Cotton laces are thicker than nylon, so if you try using those, chances are the laces won't fit.
__________________
Terri C is a Bronze lady!
Gold Moves, here I come!
Reply With Quote
  #4  
Old 10-04-2006, 09:17 PM
dbny dbny is offline
Registered User
 
Join Date: Jun 2002
Posts: 0
Quote:
Originally Posted by Debbie S
I wouldn't recommend changing the type of laces b/c whatever laces you have are geared to the size of the holes on your skates. Cotton laces are thicker than nylon, so if you try using those, chances are the laces won't fit.
I've never heard of that. Klingbeils used to come with your choice, but now they only stock nylon. That has not prevented me from using cotton blend, and I know many others who wear different brands of boot who have also switched.

I have the problem on my pinkies in the winter when I skate every day, outdoors most days. The best I can do is protect my pinkies before it starts with bandaids, mole skin or some such.
__________________
"We are a nation of Christians and Muslims, Jews and Hindus - and non-believers." Barak Obama, 44th President of the United States of America
Reply With Quote
  #5  
Old 10-04-2006, 09:44 PM
NoVa Sk8r NoVa Sk8r is offline
Registered User
 
Join Date: Apr 2003
Location: Somewhere between 6.0 and IJS
Posts: 1,470
I thought the only choices were nylon or nylon/cotton blend. Regardless, you can always switch out the laces (just might take a little elbow grease, but if you've been wearing the boots for a while, chances are the eyelets have opened up). Why they even put in those finger slicing, slippery nylon laces, I will never know!
__________________
Doubt whom you will, but never yourself.
"Do what you love, and you'll never have to work a day in your life."
-Haha, I've *arrived*! I am listed as a reference on Wikipedia.
Reply With Quote
  #6  
Old 10-05-2006, 03:11 AM
Thin-Ice Thin-Ice is offline
Registered User
 
Join Date: Aug 2004
Location: California
Posts: 973
Quote:
Originally Posted by NoVa Sk8r
I thought the only choices were nylon or nylon/cotton blend. Regardless, you can always switch out the laces (just might take a little elbow grease, but if you've been wearing the boots for a while, chances are the eyelets have opened up). Why they even put in those finger slicing, slippery nylon laces, I will never know!
Because, believe it or not, some of us actually LIKE them! And, I look at the calluses on the outside of my little fingers as part of my "skater scars" -- which I think of as being medals of athleticism. (OK, OK, so my little fingers aren't actually athletic themselves....)

Last edited by Thin-Ice; 10-06-2006 at 03:49 AM.
Reply With Quote
  #7  
Old 10-05-2006, 03:33 AM
ouijaouija ouijaouija is offline
Registered User
 
Join Date: Jul 2006
Location: uk
Posts: 154
yeh i got blisters on my pinky joint, and my index finger
__________________
starting at 28
Reply With Quote
  #8  
Old 10-05-2006, 03:42 AM
SkatingOnClouds SkatingOnClouds is offline
Registered User
 
Join Date: Sep 2005
Location: Australia
Posts: 709
I recently had to switch from a nylon lace to cotton ones. My pinky doesn't get cut anymore, but other than that I have found no real difference in their behaviour.

I have callouses on both pinkies, both index fingers and both 2nd fingers from constant lace tightening, pulling them up as hard as they will go, several times a session.

I think I probably allow the lace to slip slightly through my fingers as I lace and tighten around the hooks, which accounts for my having 3 fingers affected on each hand. Ah, yet another skating-related technique that needs revising.
__________________
Karen

I skate - therefore I am
Reply With Quote
  #9  
Old 10-05-2006, 04:51 AM
mintypoppet mintypoppet is offline
Registered User
 
Join Date: Jan 2006
Location: Oxford, UK
Posts: 143
Quote:
Originally Posted by SkatingOnClouds
I have callouses on both pinkies, both index fingers and both 2nd fingers from constant lace tightening
Yep, same here. I find colloidal blister plasters to be the best to heal up and protect my cracked pinkies.

In the lab, we had something we called 'rubber fingers', for lifting hot glassware. It was about 3cm of rubber water tubing that had been sliced down the length and could be wrapped around a finger. Something similar would be great for tightening laces, but it would need to be a material without too much grip (rubber) or too little (teflon). Any suggestions?
__________________
"Every revolutionary idea seems to evoke three stages of reaction. They may be summed up by the phrases:
(1) It's completely impossible.
(2) It's possible, but it's not worth doing.
(3) I said it was a good idea all along."
- Arthur C Clarke
Reply With Quote
  #10  
Old 10-05-2006, 05:21 AM
airyfairy76 airyfairy76 is offline
Registered User
 
Join Date: Mar 2006
Location: London, England
Posts: 140
I have noticed this well, and I have only been skating for about a month now.

I am getting callouses on my finger, rather than blisters. I think this is preferable - I just hope they don't turn to blisters later on!
__________________
Amanda

"If you are going to walk on thin ice, you might as well dance . . . "

My Skating Journal
Reply With Quote
  #11  
Old 10-05-2006, 12:01 PM
doubletoe doubletoe is offline
Registered User
 
Join Date: Oct 2004
Posts: 4,062
Strange, I don't have this problem at all. It might be that I use cotton-nylon blend laces (although so do a lot of other people) or it might be that I lace my boots up quite methodically, one notch at a time, without letting the laces slip across my fingers?
__________________
"You don't have to put an age limit on your dreams." - Dara Torres, 41, after her 2nd medal at the 2008 Olympics
Reply With Quote
  #12  
Old 10-05-2006, 02:40 PM
Kristin Kristin is offline
Registered User
 
Join Date: Feb 2004
Location: Farmington Hills, MI
Posts: 192
Quote:
Originally Posted by Debbie S
Cotton laces are thicker than nylon, so if you try using those, chances are the laces won't fit.
Not true. I have cotton (or they may be a cotton/poly blend) laces on my Jacksons & they are the thin ones made for figure skates. They are available & much kinder to your hands than nylon.

Kristin
Reply With Quote
  #13  
Old 10-05-2006, 03:02 PM
Isk8NYC Isk8NYC is offline
Board Moderator
 
Join Date: Nov 2003
Location: Below the Mason-Dixon Line
Posts: 0
Quote:
Originally Posted by NoVa Sk8r
Why they even put in those finger slicing, slippery nylon laces, I will never know!
Don Klingbeil had mentioned that they couldn't find a supplier for cotton or cotton/poly, especially in beige. The all-nylon is probably less expensive and doesn't stretch the eyelets as much. (If they're lacing the skates, it's easier and faster than the cotton.)

I remember in 2003, I was working in four different rinks. On Wednesdays, I tied MY OWN skates four times, my kids' four times and who knows how many of my students'. DH made fun of me when I had to use vaseline-and-white-socks at night.

I buy white cotton laces and dye them beige with tea, coffee, and blue dye. The cuts and callouses on my pinkies are miserable with the all-nylon laces.
__________________
Isk8NYC
Reply With Quote
  #14  
Old 10-05-2006, 04:16 PM
sue123 sue123 is offline
Registered User
 
Join Date: Nov 2004
Posts: 0
So if I get cotton blend laces, will that cut down on the blistering? Because if it still has nylon, won't it be the same problem? I got the Rainbo catolog in the mail today, and looking through it, I saw only nylon or cotton/nylon. I've tried lacing them with bandaids on my fingers, but it just cuts right through the bandaid, or it pushes the bandaid out of the way, thereby rendering the bandaids useless. I haven't tried lacing with gloves on though. Do you use just the regular gloves that you skate in? Like those stretchy ones you get at a dollar store? Cause I have a million and one of those pairs, or do you mean those medical exam gloves? I have those too for when I cook because of the blisters, and some other skin problems caused by an acid burn. Damn that concentrated sulfuric acid.

Anyways, I guess I'm going to have to pull out my laces and measure them to figure out how long I need. I need to wash them anyway, because I noticed little flecks of dried blood from when it cut through my fingers. Not fun, although nice to know I'm not alone.
Reply With Quote
  #15  
Old 10-05-2006, 04:58 PM
mintypoppet mintypoppet is offline
Registered User
 
Join Date: Jan 2006
Location: Oxford, UK
Posts: 143
Quote:
Originally Posted by sue123
So if I get cotton blend laces, will that cut down on the blistering?
FWIW, I use cotton (presumably cotton blend?) laces and still get callouses. They don't cut into my fingers, but the friction rubs at the skin - like a mini form of rope burn
__________________
"Every revolutionary idea seems to evoke three stages of reaction. They may be summed up by the phrases:
(1) It's completely impossible.
(2) It's possible, but it's not worth doing.
(3) I said it was a good idea all along."
- Arthur C Clarke
Reply With Quote
  #16  
Old 10-05-2006, 05:00 PM
renatele renatele is offline
Registered User
 
Join Date: Jan 2005
Location: DC metro area
Posts: 281
Quote:
Originally Posted by NoVa Sk8r
Why they even put in those finger slicing, slippery nylon laces, I will never know!
My skate guy says that nylon laces come with new boots so that the boots break in better - or more uniformly, rather. Since nylon laces slip and slide easily, there is no big high-tension or low-tension areas on the boot. He says that after 20-30 hours of skating those should (well... not should - if you like nylon laces, you can keep them) be changed out to the cotton blend ones as those also allow more custom lacing (you know, some like toes lose, arch/ankle tight, some like reverse ) by not slipping around so much.
__________________
--renatele
Reply With Quote
  #17  
Old 10-05-2006, 06:38 PM
kiwibabe kiwibabe is offline
Registered User
 
Join Date: Mar 2005
Location: New Zealand
Posts: 41
Yes I have them to but now they have built up into calluses. My coach says I tighten my boots out of habit and not really because I need to.
Reply With Quote
  #18  
Old 10-05-2006, 06:44 PM
NoVa Sk8r NoVa Sk8r is offline
Registered User
 
Join Date: Apr 2003
Location: Somewhere between 6.0 and IJS
Posts: 1,470
Quote:
Originally Posted by renatele
My skate guy says that nylon laces come with new boots so that the boots break in better - or more uniformly, rather. Since nylon laces slip and slide easily, there is no big high-tension or low-tension areas on the boot. He says that after 20-30 hours of skating those should (well... not should - if you like nylon laces, you can keep them) be changed out to the cotton blend ones as those also allow more custom lacing (you know, some like toes lose, arch/ankle tight, some like reverse ) by not slipping around so much.
Oh, cool; thanks for sharing. I had not heard of this before.
I'm also cursed with the fact that I need 125" laces because of my big stomping boot (size 14) ... that was just more eyelets and crossed laces to blister through!
__________________
Doubt whom you will, but never yourself.
"Do what you love, and you'll never have to work a day in your life."
-Haha, I've *arrived*! I am listed as a reference on Wikipedia.
Reply With Quote
  #19  
Old 10-05-2006, 06:48 PM
doubletoe doubletoe is offline
Registered User
 
Join Date: Oct 2004
Posts: 4,062
Quote:
Originally Posted by renatele
My skate guy says that nylon laces come with new boots so that the boots break in better - or more uniformly, rather. Since nylon laces slip and slide easily, there is no big high-tension or low-tension areas on the boot. He says that after 20-30 hours of skating those should (well... not should - if you like nylon laces, you can keep them) be changed out to the cotton blend ones as those also allow more custom lacing (you know, some like toes lose, arch/ankle tight, some like reverse ) by not slipping around so much.
Wow, that's great information! That must be one reason I like cotton-nylon blend laces so much; I tie tight in the toes, looser in the arch and tighter again in the ankle. . .
__________________
"You don't have to put an age limit on your dreams." - Dara Torres, 41, after her 2nd medal at the 2008 Olympics
Reply With Quote
  #20  
Old 10-05-2006, 09:57 PM
renatele renatele is offline
Registered User
 
Join Date: Jan 2005
Location: DC metro area
Posts: 281
Quote:
Originally Posted by NoVa Sk8r
I'm also cursed with the fact that I need 125" laces because of my big stomping boot (size 14) ... that was just more eyelets and crossed laces to blister through!
14?! Wow, I'll not complain about my (street) ladies 10, then! LOL.
__________________
--renatele
Reply With Quote
  #21  
Old 10-05-2006, 10:19 PM
mikawendy mikawendy is offline
Registered User
 
Join Date: Jun 2002
Posts: 0
Quote:
Originally Posted by sue123
So if I get cotton blend laces, will that cut down on the blistering? Because if it still has nylon, won't it be the same problem? I got the Rainbo catolog in the mail today, and looking through it, I saw only nylon or cotton/nylon. I've tried lacing them with bandaids on my fingers, but it just cuts right through the bandaid, or it pushes the bandaid out of the way, thereby rendering the bandaids useless. I haven't tried lacing with gloves on though. Do you use just the regular gloves that you skate in?
Once your fingers are healed, could you wrap medical tape around your pinkies before lacing? That might provide enough barrier, plus the tape wouldn't slip the way bandaids would (since bandaids have a part that is designed to not stick). I'd only do this once your blisters are healed and there's a good solid layer of skin. Dancers sometimes do this with their toes to reduce the chance of blisters from rubbing inside of pointe shoes.
__________________
Ask me about becoming a bone marrow donor.
http://www.marrow.org
http://www.nmdp.org
Reply With Quote
  #22  
Old 10-05-2006, 10:23 PM
NoVa Sk8r NoVa Sk8r is offline
Registered User
 
Join Date: Apr 2003
Location: Somewhere between 6.0 and IJS
Posts: 1,470
Quote:
Originally Posted by renatele
14?! Wow, I'll not complain about my (street) ladies 10, then! LOL.
And I have 12 1/2" blades, the largest size they make in Pattern 99s. Phew--just made it.

My singles coach told me that figures and changing edges in spins are going to be especially hard with my boot size. But that's better than what an ex-coach at my rink told me: She said I looked like the letter "L" when I skated because my feet stick out so much!
__________________
Doubt whom you will, but never yourself.
"Do what you love, and you'll never have to work a day in your life."
-Haha, I've *arrived*! I am listed as a reference on Wikipedia.
Reply With Quote
  #23  
Old 10-05-2006, 10:28 PM
Debbie S Debbie S is offline
Registered User
 
Join Date: May 2002
Posts: 1,160
Quote:
Originally Posted by sue123
Do you use just the regular gloves that you skate in? Like those stretchy ones you get at a dollar store?
Actually, the gloves I wear to skate are from a ski shop, made by Marmot, which makes ski things. I like them b/c they have fleece on the inside and are very soft, and warm. They are a bit thicker (but not big, puffy things that some skiers wear) than the standard stretchy gloves sold by Rainbo and in rink pro shops. I've had the gloves for 5 years and they are starting to show some wear and tear, literally, but I've checked everywhere and the company doesn't seem to make them anymore. The non-puffy ski gloves I've seen all have rubber lines on the palms and fingers - I guess for gripping the ski poles. I'm still searching for something similar to what I have, b/c they are such good quality and have held up well. In the meantime, I'll just wear my current gloves until they fall apart.

I have cotton/nylon blend (at least, that's what I was told) laces on my Klingbeils. The laces on my SP-Teris were nylon (a bit thinner than the Klingbeil laces), and they were the reason I started wearing gloves to lace up. I still find the cotton blend laces to be a bit harsh, so I'm still wearing the gloves. My Gam skates had cotton laces, and I don't think I had major problems with those, although I think they made my fingers a bit red.
__________________
Terri C is a Bronze lady!
Gold Moves, here I come!
Reply With Quote
  #24  
Old 10-06-2006, 03:46 AM
SkatingOnClouds SkatingOnClouds is offline
Registered User
 
Join Date: Sep 2005
Location: Australia
Posts: 709
Quote:
Originally Posted by sue123
Do you use just the regular gloves that you skate in? Like those stretchy ones you get at a dollar store?
I wear cycling gloves because I prefer fingerless gloves. These have lycra backs, do up with velcro tabs. The palms are made of a "synthetic suede" and there are gel pads on the parts you are likely to have on a bike handle - or fall on as a skater.

Even when I did wear full finger gloves I always took them off to do my laces. I much prefer the fingerless gloves.

Have to admit though, my gloves do look kinda biker butch rather than girly. But then I'm not a girly sort of girl I guess.
__________________
Karen

I skate - therefore I am
Reply With Quote
  #25  
Old 10-06-2006, 10:20 AM
Skate@Delaware Skate@Delaware is offline
Registered User
 
Join Date: May 2004
Location: Delaware
Posts: 3,188
I have more of a callus than a blister...I have to lace hockey skates (my son's) as well as figure skates (mine and some of the little girl's) but my pinkies do tend to get a bit raw at the beginning of the season.

My son's skates have unwaxed cotton laces, mine are cotton/nylon blend.
__________________
Skate@Delaware
Ah, show skating!!! I do it for the glitter!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:15 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Copyright © 2002 - 2005 skatingforums.com. All rights reserved.
Copyright © 2002 Graphics by Dustin. May not be used without permission.
Posts may not be reproduced without the first obtaining the written consent of the poster.