#1
|
|||
|
|||
Buying My First Skates on Monday!
I'm going to get my first pair of Figure Skates on Monday, is there anything I should keep in mind? I heard you should try 2 sizes smaller than your Shoe Size, is that true for everyone? I also don't have super thin socks but they aren't thick either, should I get super thin socks before Skate Shopping? I'm going to the skate shop at my rink, is that a bad idea?
By the way, I'm going to be pretty busy with packing and moving this weekend so if I don't have time to reply, I would like to thank you all very much in advance. Last edited by Sawyer365; 02-26-2010 at 02:06 AM. |
#2
|
|||
|
|||
The advice about two sizes too small is from someone who really knows nothing about skate fitting. Different brands have different fittings for the same apparent size. There are different widths too.
Your best bet is to go to a reputable supplier (get recommendations from several good skaters at your rink) wearing thin non-ribbed socks and get measured properly. You shouldn't wear thick socks inside figure skates. If none of the boots you try on feel as though they fit comfortably, don't be bullied in to buying a pair just because that's what the shop has in stock. Either try another shop or get the one you are at to order in a better size for you to try. It is a false economy getting a slightly wrong size just because you can get it sooner. Good luck! Sarah |
#3
|
|||
|
|||
You can send the skating director at the rink an email to ask about what fitter to use. Tell him/her that you're an almost-adult beginner and you'd like to get skates that will suit your needs. You don't want to be overbooted and you don't want to be underbooted. Since your feet won't grow much (if at all) you need a pair that will last a while. Since you want to go into dance, the director might be able to recommend someone with experience to guide you in choosing boots and blades. Sometimes the best fitter isn't at the rink. I know of a few pro shops that aren't inside the rink.
IMPORTANT: Call and make an appointment for the fitting. The clerk behind the counter might not be trained properly. You don't want to waste the time or energy using an inexperienced fitter. I second the "don't be tricked into buying what's in stock" suggestion. Too often, a pro shop will try to sell a larger size when you really need a wider boot. Let the shop measure you with both Riedell and Jackson tools, including the width, then WRITE DOWN the size/width. They'll probably be different, so note which is which. If you have to place an order, do it. It's worth the delay to wear skates that fit. Make sure the skate size you get is the right measurement. A few fitters have told me stories about getting a box labeled with one size, but the inside of the boot says something else. That's why you need the measured sizes written down. It's amazing how fast a size can leave your head. Also, don't fall for the "factory sharpening" myth. It's just a way for the fitter to save money and time - you'll end up sliding around the ice within a few wearings. Most good fitters include the initial sharpening in the price. I had a fitter show me (with some cool magnetic measuring tools) how "off" the sharpened edges on a brand-new pair of high end blades can be with the factory sharpening. Pick up a pair of terrycloth soakers and a pair of hard rubber blade guards. Ask the shop to cut the rubber guards to the right size so you're all set for skating. (A few shops have this cool cutting tool - it's like a paper cutter. So much easier than trying to do it at home with a kitchen knife.) Write your name on the hard guards - all guards look similar. Put a drying rag in a bag along with the skates. The soakers go on after you dry the skates and before you put them in the bag. They collect any condensation that forms and prevent rusting. The hard guards go on when you wear the skates off-ice. You can leave them by the side of the rink. Good luck! Have a safe trip.
__________________
Isk8NYC
|
#4
|
|||
|
|||
Quote:
Having said that, as someone new to figure skates, you may come to a point where you just have to trust the word of an experienced pro. So if you DO buy skates you're not quite sure of, make sure to verify in advance that you can return them within 30 days (or whatever you both agree to), without any hassle, if it turns out that they won't work for you. Hope you have fun with your new skates |
#5
|
|||
|
|||
I want to echo what others have said, but, as someone new to figure skating, I would make sure that you also trust the advice of your fitter to an extent. Skates should NOT hurt, BUT they will NOT fit like sneakers. They are meant to fit very closely to your foot. Don't mix up snug and too tight.
__________________
Skating Dreams "All your life you are told the things you cannot do. All your life they will say you're not good enough or strong enough or talented enough; they will say you're the wrong height or the wrong weight or the wrong type to play this or be this or achieve this. THEY WILL TELL YOU NO, a thousand times no, until all the no's become meaningless. All your life they will tell you no, quite firmly and very quickly. AND YOU WILL TELL THEM YES." --Nike |
#6
|
|||
|
|||
Thank you guys SO much, I would have been helpless if it weren't for your help! What price should I ''expect'' to pay for them, just to know that I'm not getting out of my league. Can I skate on them immediately? (not a lesson, just for fun and to get a hang of the ice.) Or do I have to break them in first or do you break them in by skating? haha
|
#7
|
|||
|
|||
Wildly estimating here, because it can vary so much - but maybe in the neighborhood of $500 all told? Around $200 for the blades, and $200-$300 for the boots. I'm looking at mid-range boots, since you're older, and MK Professional or Coronation Ace blades to get those price ranges.
Once the blades are mounted and sharpened, you can skate on them right away. We used to have to do all kinds of off-ice things to help break the boots in, but since the advent of heat molding it's not such a big deal any more. You'll probably be able to break them in just skating in them. |
#8
|
|||
|
|||
I think a pair of Jackson Marquis or Freestyles with stock blades will do for now. Riedell's renamed everything, but if they have a Gold Medallion (or equivalent) in stock, it would be fine.
I would say $250 at the most. Just mho.
__________________
Isk8NYC
|
#9
|
|||
|
|||
I think Isk8NYC is probably right, in that this equipment would be fine for now. I went a little higher on the grounds that your feet have likely stopped growing. You're going to need to replace your boots every so often anyway - mine last about 2-3 years - so you could always upgrade when you need a new pair.
|
#10
|
|||
|
|||
Quote:
__________________
2010-2011 goals: Pass Junior MIF test Don't break anything |
#11
|
|||
|
|||
Quote:
You can tell them you are a beginner & how often you are skating & what you are working on. A good bootfitter will never give you more boot than you need. You should be able to pick up a decent pair of first-time skates for less than $200 (depending on your foot/support needs). As you progress, the skates do become more expensive. But initially you do NOT need to be spending $1000. Bring a pair of tights or very thin socks with you for the fitting since this is what you will be wearing in the boots. Athletic thick socks are a very bad idea. People always think their feet are going to be cold on the ice. If your feet get cold while skating, it is usually because you are standing around for a while (and that does happen from time to time, especially when you are doing things like listening to your coach or whatever). But go with the thinnest sock you have because that will ensure the best fit. Best of luck! |
#12
|
|||
|
|||
Realize that men's skates are more expensive and usually have to be ordered. Especially the larger skate/blade sizes.
(Bought skates for DH last year and was surprised to learn that fact.) Very few skate shops keep adult sizes in stock, so be prepared to place an order.
__________________
Isk8NYC
|
#13
|
|||
|
|||
Man you people with your "fitters" are all so spoiled.
Where's the fun if you get to do that? It's better to trace your foot, send it off to a pro-shop and hope the huge amount of money you shelled out is for a boot that fits. /cries... needs new boots but refuses to do it that way again, and therefore needs an out of state trip
__________________
-Jessi What I need is a montage... Visit my skating journal or my Youtube videos (updated with 2 new videos Sept 26, 2009) |
#14
|
|||
|
|||
*pats Skittle's shoulder* There, there, I feel your pain. I haven't found a great fitter down here and my trip to NYC / Klingbeil's is canceled. I might go up to the office next month as a pretense for getting new skates.
__________________
Isk8NYC
|
#15
|
|||
|
|||
Another option for skate fitting in the US is to attend (either as a competitor or fan) one of the larger competitions in your area. Usually, at least one of the boot fitters will be there as a vendor.
Adult Nationals usually has 3-4 boot makers, and even the Atlanta Open here in June has at least 1. Any of the Regional Championships will also have boot fitters. And, there are 9 of these around the country in the Fall. Rob
__________________
Geriatric Figure Skating Crew - President for Life! Georgia Figure Skating Club - President (again) ____________________________________________ "I'm too old to die young, and too smart to be happy" - Kinky Friedman, The Mile High Club 2010 Adult Nationals - earning a gold - "Priceless" 2009 Adult Nationals - competing with a cold is not much fun. 2008 Adult Nationals - Too little sleep, too much vodka! |
#16
|
|||
|
|||
>Isk8NYC wrote
>Also, don't fall for the "factory sharpening" myth. Do you know of bad factory sharpenings from Ultima? So far my Ultima blades have been factory sharpened consistently and well. >Isk8NYC wrote Put a drying rag in a bag along with the skates. Then the moisture stays is the bag! Would it look too awful to tie the drying rag to the outside of the bag? --- Many beginners are quite happy with a $50-$75 "SoftTek" or similar type Boot/blade combination. They are conformable, comfortable and cause few foot health problems. If you are starting to do waltz jumps, or need deeper edges like an entry level ice dancer, you may want a little more support than SofTek boots can offer. think a typical rental boot pair costs about $200 (US) - maybe that is a good starting point? It is counterproductive to get boots less expensive than the rentals, unless you really can't make do with rentals. And I doubt a semi-beginner needs a blade pair that costs over $100 or so. If you get a higher level boot, and you aren't a higher level skater, you are asking for foot problems, because they will never break-in, and you will have to deal with the same potential foot problems that sometimes occur in higher level skaters because the boots can not conform to your feet. I love the idea of visiting several shops to see if one has something in stock that fits you well. Slightly loose, or loose in spots, is easy to fix with tape. But super-tight is bad. For good foot health, nothing should cause pain and nothing should touch the front or sides of the toes. You can fix a little too tight by stretching the leather, but it will keep un-stretching itself, so you will have to keep having it redone. Be sure to come to the store with super-thin socks, like you should skate with. Modifying Skate Fit and Balance for Health, Longevity and Performance |
#17
|
|||
|
|||
Quote:
Quote:
Quote:
For an almost-adult, I would steer away from the soft skates if you know you want to do figure skating. Leather provides a better combination of stiffness and flexibility once the skate's molded/broken in.
__________________
Isk8NYC
|
#18
|
|||
|
|||
Yep, I have Ultima dance blades & both pairs I've owned needed a real sharpening when they came in. They come "somewhat" sharpened, IMO, but if you have any skills at all, their sharpening won't be sufficient. I skate on a 7/16 sharpening, don't know what they do at the factory, but it was a LOT flatter than that!! LOL, I was sliding all over the ice!
|
#19
|
|||
|
|||
Not exactly but I do know of a pair of Jackson skates with factory fitted Ultima blades on which one of the blades was actually bent - something an experienced sharpener spotted immediately the first time they were sharpened.
|
#20
|
|||
|
|||
I called the Skate Shop and spoke to a very sweet and very professional woman.
She doesn't work on Mondays or Tuesdays so Wednesday is the day I'm going, she said for me to come in and she'll measure me and show me choices that they offer and order what will fit! That's sounds wonderful to me, does that sound good? Last edited by Sawyer365; 03-08-2010 at 06:40 PM. |
#21
|
|||
|
|||
Quote:
My skate shop had some decent-looking beginner boot and blade combos for around $200 (some Jackson, some Riedell). A good fitter should also take your height/weight into consideration, because that will also make a difference.
__________________
2010-2011 goals: Pass Junior MIF test Don't break anything |
#22
|
|||
|
|||
Sounds excellent!
__________________
Isk8NYC
|
#23
|
|||
|
|||
Quote:
Sarah |
#24
|
|||
|
|||
You might want to try something around this level
http://www.usaskates.com/figureskating/jajs1892m.html or this level http://www.usaskates.com/figureskating/jadj2072m.html I remember I started my figure skating classes in Jacksons that came with blade attached and cost around $150 (of course, that was all the way back in 1992). A lot of people like Riedells, too. As for the fit, you do not want to have any extra room in the boots, but you also don't want the boots to press in on your foot or squeeze your toes. If they do--even a little-get a half size wider or longer, depending on whether they are too short or too narrow.
__________________
"You don't have to put an age limit on your dreams." - Dara Torres, 41, after her 2nd medal at the 2008 Olympics |
#25
|
|||
|
|||
I got fitted for Skates and I ordered Custom-Made Harlick Boots. The Blades will be Comet since that's what was suggested and I'll have the Boots on the 15th!!
|
Thread Tools | |
Display Modes | |
|
|